Scratch protection guards. NOT to be used for impalement protection. Mushroom style safety caps provide limited protection from protruding rebar. Orange for increased visibility.

A comfortable acrylic knit hat that has parallel reflective silver stripes to enhance visibility.

The Disposable Polyethylene Glove fits either hand.

Enjoy warm hands in the winter with the fleece-lined Select Grain Pigskin Driver’s Glove.

Ideal for the outdoor construction worker or where high visibility is a requirement.

The Sweatshirt is made of medium weight polyester for added visibility and warmth on chilly job sites. Small gaps in the reflective tape on the sides, shoulders and arms allow for better freedom of movement, without sacrificing reflectivity. Black on the lower torso and arms hides dirt and grime.

Tough 5-mil Vinyl Glove fits either hand.

A comfortable acrylic knit hat that has parallel reflective silver stripes to enhance visibility.

A four-season work Work Jacket. The McKinley Jacket has a 100% waterproof PVC-coated polyester shell over a removable non-pilling polar fleece liner. When the Jacket is used with the liner intact it is warm enough to protect in temperatures as low as -20°F. The liner can be removed on warmer days and even worn on its own.

Glove features a double layer of leather on the palm, thumb and index finger for added protection.

A four-season work Work Jacket. The McKinley Jacket has a 100% waterproof PVC-coated polyester shell over a removable non-pilling polar fleece liner. When the Jacket is used with the liner intact it is warm enough to protect in temperatures as low as -20°F. The liner can be removed on warmer days and even worn on its own.

A plasticized safety or gauntlet cuff is launderable, which increases the life of the Select Split Leather Palm Work Glove.

Ideal for the outdoor construction worker or where high visibility is a requirement.

A four-season Work Jacket. The McKinley Jacket has a 100% waterproof PVC-coated polyester shell over a removable non-pilling polar fleece liner. When the Jacket is used with the liner intact it is warm enough to protect in temperatures as low as -20°F. The liner can be removed on warmer days and even worn on its own.

The clute-cut, nitrile-impregnated work glove resists cuts and abrasion. The soft interlock lining dries quickly and is treated to resist bacterial growth.

Rugged heavyweight polyester holds up to the toughest work conditions, and keeps the wearer safe and warm. The polyester microfleece interior and attached hood keep out the elements and ensure a high level of comfort.

The ANSI Class 3 Vest is made of comfortable 100% polyester mesh with AwareLite™ silver reflective stripes on the torso and arms for the highest level of visibility.

Rugged heavyweight polyester holds up to the toughest work conditions, and keeps the wearer safe and warm. The polyester microfleece interior ensures a high level of comfort. The horizontal torso stripe has 1” break at the side seams which lets the Sweatshirt stretch, and eliminates the tight fit that continuous stripes can cause.

Constructed of durable select grain cowhide leather with hi vis orange fingertips and “Watch Your Hands” emblazoned on the back to remind workers to be careful. Ideal for construction, masonry, iron/steel work, agriculture, mining, foundry work, and use by electrical contractors. 100g Thinsulate lining provides warmth in cold temperatures.

FR polyester meets NFPA 701 for flame resistance (not rated for arc). The five-point (shoulders, sides and front) breakaway design enhances safety, and adjustable sizing fits a wide range of wearers and allows for use over bulky bunker gear or coats. Clear ID panels on the front and back allow for easy identification of first responders. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

A black nylon shell fully coated by black flat nitrile. The back of the hand is completely covered, providing added protection.

A black nylon shell is covered on the palm, fingers, and knuckless by a black foam nitrile coating that allows for excellent grip, especially on oily or wet surfaces.

POSIWEAR BA (breathable advantage) Coveralls are constructed of a microporous polyethylene film bonded to spunbonded polypropylene. The result is good resistance to dry particulates and chemical-based sprays without sacrificing comfortable breathability.

The wide mesh construction of the Truckers Cap allows for excellent breathability. The solid structured front helps the hat hold its shape. A silver reflective stripe on a contrasting orange background around the bottom of the hat provides a high level of visibility.

Hook-and-loop breakaway points at the shoulders, sides, and front enhance safety for those who work around traffic or dangerous machinery. Made from comfortable but durable 100% knit polyester mesh.

Tailored specifically to fit women. Sized for women so that they’re both comfortable and visible on the jobsite. Durability is enhanced by a DuPont Teflon fabric protector coating, which repels water and oil-based spills, but is still breathable.

Two bright LEDs in the brim and two more under the brim provide the light needed to illuminate workspaces without using a flashlight or large headlamp. Use the brim LEDs to light up to 50’ of space in front of you. Use the two lower brim lights for close-up tasks. Turn on all four LEDs for maximum visibility.

FR polyester meets NFPA 701 for flame resistance (not rated for arc). The five-point (shoulders, sides and front) breakaway design enhances safety, and adjustable sizing fits a wide range of wearers and allows for use over bulky bunker gear or coats. Clear ID panels on the front and back allow for easy identification of first responders. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

Bird’s-Eye polyester is extremely lightweight, breathable and effective at wicking perspiration, ideal for workers in hot environments. The reflective tape has a 1-1/2” gap on the side seams. This allows the T-shirt to stretch, eliminating the tight fit that can be caused by continuous tape. 2” silver reflective stripes provide Class 2 high visibility. One chest pocket.

Bird’s-Eye polyester is extremely lightweight, breathable and effective at wicking perspiration, ideal for workers in hot environments. The reflective tape has a 1-1/2” gap on the side seams. This allows the T-shirt to stretch, eliminating the tight fit that can be caused by continuous tape. 2” silver reflective stripes provide Class 2 high visibility. One chest pocket.

The Winter Cap provides both added visibility and warmth for outdoor workers in rugged conditions. This non-ANSI certified beanie features 3M™ reflective yarn for superior reflective capability.

Class 3 visibility in a stylish polo. Ideal for use by foremen, construction supervisors, or those who need visibility but want to wear more than a t-shirt or vest.

Made from high-quality oil- and abrasion-resistant leather, which provides comfort, dexterity, and durability. Features a waterproof moisture barrier. Reinforced textured leather palm patches feature gel padding for vibration and impact resistance. A large heavy-duty TPU rubber padded protector on the back of the hand, and rubber protectors on the fingers increase the level of protection from impact.

A high-density polyethylene Bump Cap combined with a a clear polycarbonate faceshield.

Made from high-quality oil- and abrasion-resistant leather, which provides comfort, dexterity, and durability. Features a waterproof moisture barrier. Reinforced textured leather palm patches feature gel padding for vibration and impact resistance. A large heavy-duty TPU rubber padded protector on the back of the hand, and rubber protectors on the fingers increase the level of protection from impact. A 3M Thinsulate lining adds excellent warmth without bulk.

Class 3 visibility in a stylish polo. Ideal for use by foremen, construction supervisors, or those who need visibility but want to wear more than a t-shirt or vest.

Class 3 visibility in a stylish polo. Ideal for use by foremen, construction supervisors, or those who need visibility but want to wear more than a t-shirt or vest.

Hi Vis Neck Shade fits regular and full brim hard hats. The mesh material provided air flow, shade and hi visibility. Extra Fabric Allows for Tucking Inside of Collar. Elastic fits snugly over the rim of the hard hat or cap. Features a 5/8” silver reflective stripe on a 2” contrasting lime background for excellent visibility.

Breathable and comfortable modacrylic micromesh meets NFPA 70E arc standards (ATPV of 5.5 cal/cm²) and ASTM F1506 for flame resistance. It meets Hazard Risk Category (HRC) 1 and is ideal for higher risk applications. Breakaway points on the shoulders, sides and front enhance safety. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

Enhance safety by adding visibility to a cap or full brim style hard hat. The Hard Hat Cover fits over most hard hats, and features high-gloss prismatic 1” orange stripes on a bright lime background.

Enhance safety by adding visibility to a cap or full brim style hard hat. The Hard Hat Cover fits over most hard hats, and features high-gloss prismatic 1” lime stripes on a bright orange background.

Breathable and comfortable modacrylic mesh meets NFPA 70E arc standards (ATPV of 5.5 cal/cm²) and ASTM F1506 for flame resistance. It meets Hazard Risk Category (HRC) 1 and is ideal for higher risk applications. The vest also has seven pockets, including a large back survey pocket, for ample personal storage. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

Breathable and comfortable modacrylic micromesh meets NFPA 70E arc standards (ATPV of 5.5 cal/cm²) and ASTM F1506 for flame resistance. It meets Hazard Risk Category (HRC) 1 and is ideal for higher risk applications. The vest has four large outer front pockets. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

Stay dry in torrential downpours! This heavy-duty three-piece rainsuit shrugs off even the heaviest rain. Made of 0.35mm PVC/Polyester with reinforced seams for durability and strength. High-visibility green/yellow color and 2” silver reflective stripes provides ANSI Class 3 visibility for road workers and flag men. Suit includes jacket with detachable drawstring hood and bib overalls.

Seven-pocket ANSI Class 2 Safety Vest. Dual horizontal silver stripes enhance night time visibility. Mesh construction is lightweight, breathable and cool. Mic tab on each side of upper chest. Hook-and-loop front closure. Seven pockets offer ample storage.

Seven-pocket ANSI Class 2 Safety Vest. Dual horizontal silver stripes enhance night time visibility. Mesh construction is lightweight, breathable and cool. Mic tab on each side of upper chest. Hook-and-loop front closure. Seven pockets offer ample storage.

The ANSI Class 3 Vest is made of comfortable 100% polyester mesh with AwareLite™ silver reflective stripes on the torso and arms for the highest level of visibility.

The clute-cut, nitrile-impregnated work glove resists cuts and abrasion. The soft cotton lining dries quickly and is treated to resist bacterial growth.

The Driver’s style nitrile glove is a low-cost, high-performance alternative to leather. It features a nitrile coating that offers excellent abrasion resistance and a jersey lining that absorbs perspiration and provides a comfortable fit.