The Flex Arc Jacket is made from a stretchable polyurethane exterior on a comfortable weft knitted FR-treated cotton. It has an ATPV rating of 17.6 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. It is intended for use by utility workers exposed to electrical arc hazard. Note: There is a 5 to 6 week lead time for all Neese outerwear.

Made from a blend of flame-resistant Nomex and Lenzing FR, which is a natural heat- and flame-resistant fiber that also offers excellent breathability and comfort. The medium weight Jacket offers inherent flame resistance without the bulk of a heavier weight coat.

Made from a blend of flame-resistant Nomex and Lenzing FR, which is a natural heat- and flame-resistant fiber that also offers excellent breathability and comfort. The medium weight Jacket offers inherent flame resistance without the bulk of a heavier weight coat. Slightly longer in the arms and torso to accommodate taller workers.

**Special Order** 2-5 Weeks Delivery: Made of 7-oz inherently flame-resistant Modacrylic. The Jacket has an ATPV rating of 8.4 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. It meets ASTM F1959, NFPA 70E and NFPA 2112.

An arc-rated Rain Jacket that provides waterproof protection, but is breathable for added comfort. IGX Technology utilizes a DWP-treated outer shell which causes water to bead up, a bi-component ePTFE breathable membrane, and an inner Nomex fabric for outstanding waterproof protection. Seams are sealed with wide tape, and there are no horizontal seams, minimizing seam exposure. Ideal for use by utility, and oil and gas workers.

The combination of flame-resistant PVC coating on nonwoven Nomex® provides excellent thermal performance and maintains 100% waterproof protection, in a soft, lightweight jacket that conforms to ASTM F1891 for Arc Thermal Performance, with an ARC rating of 11 calories/cm². Zipper front closure. Two pockets.

Made from a 10-oz FR polyurethane moisture barrier with a woven FR cotton weft knit interior. The combination results in an ATPV rating of 21.6 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Jacket can be layered with 7-oz Indura Ultra Soft® garments to create a 40 cal/cm² ensemble. Note: It meets ASTM F1891 for arc rainwear, but also meets ASTM F2733 for flash fire protection, which is rare for arc rainwear.

The Arc-Rated Winter Jacket repels water, and meets NFPA 70E arc standards (ATPV of 8.7) and ASTM F1506 for flame resistance. Its shell is made from a high-performance ASTM fabric that offers the highest winter jacket ATPV available. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

The Arc-Rated Winter Jacket repels water, and meets NFPA 70E arc standards (ATPV of 8.7) and ASTM F1506 for flame resistance. Its shell is made from a high-performance ASTM fabric that offers the highest winter jacket ATPV available. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

Made from a 10-oz FR polyurethane moisture barrier with a woven FR cotton weft knit interior. The combination results in an ATPV rating of 19 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Jacket can be layered with 7-oz Indura Ultra Soft® garments to create a 40 cal/cm² ensemble. Note: It meets ASTM F1891 for arc rainwear, but also meets ASTM F2733 for flash fire protection, which is rare for arc rainwear.

The combination of flame-resistant PVC coating on nonwoven Nomex® provides excellent thermal performance and maintains 100% waterproof protection, in a soft, lightweight 48” coat that conforms to ASTM F1891 for Arc Thermal Performance, with an ARC rating of 11 calories/cm³. Zipper front closure. Two pockets.

The Arc-Rated 3-in-1 Jacket repels water, and meets NFPA 70E arc standards (ATPV of 8.7) and ASTM F1506 for flame resistance. Its shell is made from a high-performance ASTM fabric. A Vest snaps into the Jacket and can be removed for warmer conditions. The Class 2 Vest can also be worn on its own. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

Made from an FR polyurethane laminate on high-performance ASTM fabric. The zip-out lining is quilted FR cotton with Thinsulate insulation, which provides a high level of warmth without bulk. The Bomber provides Hazard Risk Category 2 protection and meets ANSI Class 3 standards. Made to Order: This is a non-stock jacket from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

Made from an FR polyurethane laminate on high-performance ASTM fabric. The zip-out lining is quilted FR cotton with Thinsulate insulation, which provides a high level of warmth without bulk. The 32” Parka provides Hazard Risk Category 2 protection and meets ANSI Class 3 standards. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

The Flex Arc Jacket is made from a stretchable polyurethane exterior on a comfortable weft knitted FR-treated cotton. It has an ATPV rating of 19 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. It is intended for use by utility workers exposed to electrical arc hazard. Note: There is a 5 to 6 week lead time for all Neese outerwear.

Flex Arc Bib Pants made from a stretchable polyurethane exterior on a comfortable weft knitted FR-treated cotton. They have an ATPV rating of 17.6 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Bib Pants are intended for use by utility workers exposed to electrical arc hazard. Note: There is a 5 to 6 week lead time for all Neese outerwear.

Arc-rated Rain Overalls that provide waterproof protection, but are breathable for added comfort. IGX Technology utilizes a DWP-treated outer shell which causes water to bead up, a bi-component ePTFE breathable membrane, and an inner Nomex fabric for outstanding waterproof protection. Seams are sealed with wide tape, and there are no horizontal seams, minimizing seam exposure. Ideal for use by utility, and oil and gas workers.

Made from a 10-oz FR polyurethane moisture barrier with a woven FR cotton weft knit interior. The combination results in an ATPV rating of 19 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Jacket can be layered with 7-oz Indura Ultra Soft® garments to create a 40 cal/cm² ensemble. Note: It meets ASTM F1891 for arc rainwear, but also meets ASTM F2733 for flash fire protection, which is rare for arc rainwear.

Made from a 10-oz FR polyurethane moisture barrier with a woven FR cotton weft knit interior. The combination results in an ATPV rating of 21.6 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Jacket can be layered with 7-oz Indura Ultra Soft® garments to create a 40 cal/cm² ensemble. Note: It meets ASTM F1891 for arc rainwear, but also meets ASTM F2733 for flash fire protection, which is rare for arc rainwear.

The combination of flame-resistant PVC coating on nonwoven Nomex® provides excellent thermal performance and maintains 100% waterproof protection, in soft, lightweight overalls that conform to ASTM F1891 for Arc Thermal Performance, with an ARC rating of 11 calories/cm³. Snap fly front closure. No pockets.

Flex Arc Bib Pants made from a stretchable polyurethane exterior on a comfortable weft knitted FR-treated cotton. They have an ATPV rating of 19 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Bib Pants are intended for use by utility workers exposed to electrical arc hazard. Note: There is a 5 to 6 week lead time for all Neese outerwear.

**Special Order** 2-5 Weeks Delivery: Made of Tecasafe™ Plus 700 7-oz flame-resistant Modacrylic material, Provides ANSI Class 2 level visibility. 5-Point breakaway points on the sides, shoulders and front which ensure that it easily comes off of the wearer if it snags on machinery or passing traffic. The vest has an ATPV rating of 8.4 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Features a D-Ring Access On Upper Back.

Hazard Risk Category 2 level protection with the added safety provided by reflective striping. Flame-resistant cotton is self extinguishing and will not continue to burn after a flame source has been removed.

Hazard Risk Category 2 level protection with the added safety provided by reflective striping. Flame-resistant cotton is self extinguishing and will not continue to burn after a flame source has been removed.

This flame-resistant treated cotton T-Shirt is HRC 2 rated with an ATPV value of 11.7 cal/cm². It’s a good choice when enhanced visibility is desired but ANSI high-visibility compliance is not required. Limited wash FR per ASTM 1506.

This flame-resistant treated cotton T-Shirt is HRC 2 rated with an ATPV value of 11.7 cal/cm². It’s a good choice when enhanced visibility is desired but ANSI high-visibility compliance is not required. Limited wash FR per ASTM 1506.

This flame-resistant treated cotton T-Shirt is HRC 2 rated with an ATPV value of 11.7 cal/cm². It’s a good choice when enhanced visibility is desired but ANSI high-visibility compliance is not required. Limited wash FR per ASTM 1506.

This flame-resistant treated cotton T-Shirt is HRC 2 rated with an ATPV value of 11.7 cal/cm². It’s a good choice when enhanced visibility is desired but ANSI high-visibility compliance is not required. Limited wash FR per ASTM 1506.

This flame-resistant treated cotton T-Shirt is HRC 2 rated with an ATPV value of 11.7 cal/cm². It’s a good choice when enhanced visibility is desired but ANSI high-visibility compliance is not required. Limited wash FR per ASTM 1506.

The comfort of breathable cotton and the safety of fire resistance combine in this arc-rated Short Sleeve T-shirt, ideal for hot summer days. High performance FR cotton fabric and reflective material meet both ASTM FR and NFPA 70E arc ratings (ATPV 11.0) for Best Practices in Class 2 High Visibility FR Long Sleeve T-shirts. Made to Order: This is a non-stock item from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

FR Cotton Short Sleeve High Visibility Polo is ANSI-Style for best practices use. Ideal for use in non-motor vehicle environment where the ANSI Hi Vis standard is not applicable.

The comfort of breathable cotton and the safety of fire resistance combine in this (ATPV 11.0 cal/cm) arc-rated Long Sleeve T-shirt. The left chest cell phone pocket keeps your cell phone handy. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

FR Cotton Short Sleeve High Visibility Polo is ANSI-Style for best practices use. Ideal for use in non-motor vehicle environment where ANSI Hi Vis standard is not applicable.

The comfort of breathable cotton and the safety of fire resistance combine in this (ATPV 11.0 cal/cm) arc-rated Long Sleeve T-shirt. The left chest cell phone pocket keeps your cell phone handy. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

The comfort of breathable cotton and the safety of fire resistance combine in this arc-rated Long Sleeve T-shirt, ideal for hot summer days. High performance FR cotton fabric and reflective material meet both ASTM FR and NFPA 70E arc ratings (ATPV 11.0) for Best Practices in Class 2 High Visibility FR Long Sleeve T-shirts. Made to Order: This is a non-stock vest from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

The comfort of breathable cotton and the safety of fire resistance combine in this arc-rated Long Sleeve T-shirt, ideal for hot summer days. High performance FR cotton fabric and reflective material meet both ASTM FR and NFPA 70E arc ratings (ATPV 11.0 cal/cm²) for Best Practices in Class 2 High Visibility FR Long Sleeve T-shirts (does not meet ANSI visibility requirement). Made to Order: This is a non-stock item from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

FR Cotton Long Sleeve High Visibility T-Shirt is ANSI-style for best practices use. Ideal for use in non-motor vehicle environment where ANSI high-visibility standards are not applicable.

The comfort of breathable cotton and the safety of fire resistance combine in this (ATPV 11.0 cal/cm²) arc-rated Long Sleeve T-shirt. Made to Order: This is a non-stock item from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

FR Cotton Long Sleeve High Visibility T-Shirt is ANSI-style for best practices use. Ideal for use in non-motor vehicle environment where ANSI high-visibility standards are not applicable.

The comfort of breathable cotton and the safety of fire resistance combine in this (ATPV 11.0 cal/cm²) arc-rated Long Sleeve T-shirt. Made to Order: This is a non-stock item from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

The comfort of breathable cotton and the safety of fire resistance combine in this arc-rated Short Sleeve T-shirt, ideal for hot summer days. High performance FR cotton fabric and reflective material meet both ASTM FR and NFPA 70E arc ratings (ATPV 11.0) for Best Practices in Class 2 High Visibility FR Long Sleeve T-shirts. Made to Order: This is a non-stock item from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

Here’s a high-visibility, fire-resistant cotton tool vest that is cut shorter in the waist so you can comfortably wear your tool belt. Includes three non-sparking dielectric plastic snaps on the front, two outside chest cell phone/pencil pockets, and two inner pouch pockets.

Combines ANSI Class 2 high-visibility protection with the safety offered by flame-resistant 7.75-oz Modacrylic blend. The T-Shirt has a remarkable arc rating (ATPV) of 10 cal/cm², and it is compliant with HRC (Hazard Risk Category) 2. It eliminates the need for a worker to wear both an FR/arc-rated vest along with an FR/arc-rated shirt.

Short Sleeve T-Shirt is ANSI Class 2 and made from an inherently flame-resistant jersey that is 61% modacrylic, 32% cotton, and 7% polyester. The comfortable fabric meets ASTM F1506 (ATPV 10 cal/cm² and NFPA 70E HRC level 2). Reflective tape is also FR-rated. Shirt has a chest pocket.

Combines ANSI Class 2 high-visibility protection with the safety offered by flame-resistant 7.75-oz Modacrylic blend. The T-Shirt has a remarkable arc rating (ATPV) of 10 cal/cm², and it is compliant with HRC (Hazard Risk Category) 2. It eliminates the need for a worker to wear both an FR/arc-rated vest along with an FR/arc-rated shirt.

Short Sleeve T-Shirt is ANSI Class 2 and made from an inherently flame-resistant jersey that is 61% modacrylic, 32% cotton, and 7% polyester. The comfortable fabric meets ASTM F1506 (ATPV 10 cal/cm² and NFPA 70E HRC 2). Reflective tape is also FR-rated. Shirt has a chest pocket.

The high-performance acrylic blend is extremely soft, breathable, and moisture wicking. The T-Shirt provides Hazard Risk Category 2 protection and meets ANSI Class 2 standards, but doesn’t sacrifice comfort. Meets minimum for primary layer protection (NFPA 70E). Made in the U.S.A. Made to Order: This is a non-stock T-Shirt from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

The high-performance acrylic blend is extremely soft, breathable, and moisture wicking. The T-Shirt provides Hazard Risk Category 2 protection and meets ANSI Class 2 standards, but doesn’t sacrifice comfort. Meets minimum for primary layer protection (NFPA 70E). Made in the U.S.A. Made to Order: This is a non-stock T-Shirt from the supplier. Allow 2-3 weeks time for production and 4-5 days shipment time.

Kit includes an ANSI Class 3 Rainwear Jacket (19 cal/cm²), ANSI Class E Rain Overalls (19 cal/cm²), Indura Ultra Soft® Coveralls (8 cal/cm²). When H2O raingear is layered over the Coveralls, the apparel combines to have an ATPV of 40 cal/cm². Kit also includes 10” Leather Protectors, 11” Rubber Insulating Gloves (Class 0), Faceshield/Safety Helmet (10 cal/cm²), Safety Glasses, Glove Bag, Electrical Gear Bag, and a Mesh Rainwear Bag. Note: Rainwear meets ASTM F1891 for arc rainwear, but also meets ASTM F2733 for flash fire protection, which is rare for arc rainwear.

Kit includes an ANSI Class 3 Jacket, ANSI Class E Overalls and a convenient mesh Carry Bag. Rainwear is made from a 10-oz FR polyurethane moisture barrier with a woven FR cotton weft knit interior. The combination results in an ATPV rating of 21.6 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Note: Meets ASTM F1891 for arc rainwear, but also meets ASTM F2733 for flash fire protection, which is rare for arc rainwear.

Kit includes an ANSI Class 3 Jacket, ANSI Class E Overalls and a convenient mesh Carry Bag. Rainwear is made from a 10-oz FR polyurethane moisture barrier with a woven FR cotton weft knit interior. The combination results in an ATPV rating of 19 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Note: It meets ASTM F1891 for arc rainwear, but also meets ASTM F2733 for flash fire protection, which is rare for arc rainwear.

The Petro Arc series is designed for special extended protection for industrial workers and operators in multi-hazard environments. The Petro Arc offers a unique protective wear solution for the various challenging environments of incidental chemical splash, flash fire, electrical arc flash, and harsh weather conditions. When the job calls for more than just your basic rain suit, the Petro Arc will provide the protection that you need to get the job done safely. Jacket offers an ATPV rating of 13.3 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Note: There is a 5 to 6 week lead time for all Neese outerwear.

The Petro Arc series is designed for special extended protection for industrial workers and operators in multi-hazard environments. The Petro Arc offers a unique protective wear solution for the various challenging environments of incidental chemical splash, flash fire, electrical arc flash, and harsh weather conditions. When the job calls for more than just your basic rain suit, the Petro Arc will provide the protection that you need to get the job done safely. Jacket offers an ATPV rating of 13.3 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Note: There is a 5 to 6 week lead time for all Neese outerwear.