An added level of protection for the faceshields on all 3M Hardcap Assemblies and Snapcap Hoods.

Faceshield Covers protect the lens on all 6000 Series Full Facepieces.

Remote Alarms have been designed to duplicate local alarms found on the primary equipment and to signal workers in a remote location that there is an alarm condition within their system.

This portable monitor unit connects easily to any high or low pressure compressed air breathing source and monitors air for CO content.

The Portable Carbon Monoxide Airline Monitor plugs in easily to any Grade D airline manifold using the included adapters and monitors supplied air for CO content.

Apparatus can be used with any NIOSH particulate or gas/vapor respirator with a particulate prefilter to test face-to-respirator seal.

Apparatus can be used with any NIOSH particulate or gas/vapor respirator with a particulate prefilter to test face-to-respirator seal.

Apparatus can be used with any NIOSH particulate or gas/vapor respirator with a particulate prefilter to test face-to-respirator seal.

Fiberglass-free Cartridges are fully compatible with Gerson Signature Series Cartridge Respirators.

The 3M Particulate Filter 5N11, N95 is NIOSH approved and provides protection against certain non-oil containing aerosols. This P-series filter is appropriate for both oil and non-oil containing environments with extended time-use limitations. For use with 3M 6000, 7000, and FF-400 Series Facepieces.

The 3M 7093 P100 Filter is NIOSH approved for environments containing certain oil and non-oil based particles.

Particulate protection for Signature Series Low-Maintenance Respirators.

For use with the 8000 Series Half Mask Respirator, cartridges snap into the facepiece.

3M Cartridge/Filters provide a high level of comfort and exceptional respiratory protection, and offer significant advantages over earlier stacked cartridge/filters.

The 701 Adapter permits the combination of 3M's 7800 Full Facepiece Respirator with 3M's 6000 Series cartridges or 2000 Series filters.

Choose from the 501 or 502 depending on cartridge and filter type required on the facepiece. For more information 3M.com/Occsafety online.

3M 6000 Series Cartridges and Filters are designed for use with 3M Facepieces with bayonet attachments including 6000 Series half and full facepieces, 7500 Series half facepieces, 7800 Series full facepieces, and FF-400 Series facepieces.

The 3M™Particulate Filter 2071, P95 with Advanced Electret Media technology provides protection in environments where oil, and non-oil based particles are present.

When properly fitted, use for a variety of applications including dust, welding, metal pouring and certain finishing operations for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces.

The 3M™ Particulate Filter 2097, P100, with Nuisance Level Organic Vapor Relief is 3M recommended for ozone protection up to 10 times the Threshold Limit Value.

The 3M Particulate Filter 2091, P100 provides workers with versatile protection, exceptional filter efficiency, durability, economy and simplicity.

The Moldex 9000 Reusable Full Facepiece Respirator features an exclusive, over-molded lens design that eliminates the common heavy clamping frame. This creates a lightweight mask that offers a greater field of vision, with fewer parts and minimal maintenance. And it’s completely metal-free so it’s ideal for use in mines, refineries, and other industries where metal parts can create an explosion hazard.

This lightweight, easy-to-use clip-on welding adapter can be used in conjunction with the 3M™ Full Facepiece 7800S and is approved in all modes of operation as an accessory product. It is compatible with a standard 4-1/2 x 5-1/4” lens. Note: Protects the eyes but does not provide primary eye protection.

The Ultimate FX Full Facepiece Respirator is intended for use in the most extreme environments. It is the only respirator to feature a 3M Scotchgard™ Protector coating and a Scotchgard semi-permanent lens cover, which help the lens resist dirt, paint, and grime, and make the lens easier to clean. The lens cover attaches with a moderate adhesive and can easily be repositioned.

The 3M 6000 Series Full Facepiece is lightweight and well balanced. It features a unique center adapter which forces exhaled breath and moisture downward and combines with the Cool Flow™ exhalation valve to make breathing easy and reduce heat and moisture buildup.

The 7800S Ultimate Reusable Facepiece is extremely versatile and can be used in several different ways, ranging from use as an air purifying respirator to powered air and dual airline configurations.

The high level of respiratory protection needed for renovators, lead abatement professionals, and painters housed in a convenient plastic storage box. The P100 filter provides 99.997% efficiency (NIOSH only requires 99.97%), and the chemical cartridge protects against organic vapor, sulfur dioxide, chlorine, hydrogen chloride, and hydrogen fluoride. The reusable respirator is made of non-allergenic, comfortable silicone, and features a double exhalation valve for extremely easy breathing and added comfort during long work days.

Certified under NIOSH 42 CFR 84 to have a filter efficiency level of 99.97% or greater against oil and non-oil based particulate aerosols.

The high level of respiratory protection needed for renovators and lead abatement professionals, housed in a convenient plastic storage box. The P100 filter provides 99.997% efficiency, which is 10 times more than the rate required by NIOSH (99.97%). The reusable respirator is made of non-allergenic, comfortable silicone, and features a double exhalation valve for extremely easy breathing and added comfort during long work days.

The reusable 6000 Series half facepiece does not require extra parts to attach the filters or cartridges directly to the facepiece. Features the 2091 Series P100 filter approved for environments containing certain oil and non-oil based particles.

The Half Facepiece 7500 Series has state-of-the-art features that provide unsurpassed comfort.

Specifically prepared for paint and pesticide applications, these preassembled respirators include a 5000 series organic vapor respirator complete with one pair of 5P71 P95 filters and one pair of 501 retainers.

The 5000 Series maintenance-free respirator is designed for comfort and preassembled for convenience.

The reusable 6000 Series Half Facepiece does not require extra parts to attach the filters or cartridges directly to the facepiece.

Designed for workers who wear hard hats and need to communicate frequently. A unique head harness system allows wearer to drop the facepiece to his chest without removing his hard hat.

The 5000 Series maintenance-free respirator is designed for comfort and preassembled for convenience.

The 5000 Series maintenance-free respirator is designed for comfort and preassembled for convenience.

A convenient and effective way to clean personal safety equipment. 100 individually packaged, pre-moistened wipe

Clean dirt and grime from elastomeric facepiece respirators with 3M Respirator Cleaning Wipes.

The Gerson N100 SmartMask Particulate Respirator offers a traditional, 3D cup-shaped design with away-from-the-face comfort. The addition of the Comfort MAXX Super Valve lowers breathing resistance to 1/3 to 1/2 that of traditional center-post valves, providing a level of comfort otherwise available only on more costly respirators.

Provides the highest rated filter efficiency against solid and non-oil liquid aerosols in a comfortable, maintenance-free design.

The 8246 provides relief from nuisance levels (below OSHA PEL) of acid gases like hydrogen fluoride, sulfur dioxide and chlorine, as well as solid and liquid particles including those containing oil.

The 8247 has a carbon layer that provides relief from nuisance-level organic vapors with concentrations below OSHA PEL.

The 8240 is designed to provide at least 95% filter efficiency against both oil and non-oil particulate contaminants, making it ideal for use in applications like grinding, sanding and machining.

The 2360 P100 Particulate Respirator provides durable, long-lasting protection against oil-based and non-oil-based particulates. Dura-Mesh shell resists collapsing, even in hot, humid conditions, and it protects the filter media, keeping it clean-looking longer. This results in a longer service life, lowering costs.

The 8293's P rating and 100 class filtration are ideal for use in a variety of non-oil and oil aerosol applications, including welding, pharmaceutical manufacturing, lead abatement and tasks involving OSHA substance-specific regulated particles.

This economical, easy-to-use, maintenance-free respirator includes a carbon layer to remove nuisance-level (concentrations not exceeding OSHA PEL) acid gases such as sulfur dioxide, hydrogen fluoride, and chlorine.

The 8271 Particulate Respirator is ideal for protection in oil or non-oil aerosol environments. Features include an adjustable metal noseclip, and the 3M Cool Flow™ Exhalation Valve for cool dry comfort.

The 8577 is designed for applications where nuisance levels of organic vapors are present. The 3M Cool Flow™ Exhalation Valve offers easy exhalation and cool, dry comfort. The adjustable M-noseclip provides a comfortable, secure seal.

The Respirator Locker provides workers with a hygienic storage case and a supply of respirators. Locker includes five masks, which is a week's supply for most workers. Also serves as a personal dispenser for workers who travel to field worksites.